DIY Bottle terrarium...

A terrarium is a interesting focal for on a shelf,
and as it was time for 'something different', and a rearrange session on my book shelf, 
I created this DIY Bottle terrarium...
You will need:
 a large clean bottle or container made from clear glass
Some potting mix
Bark (I used orchid bark)
Fine white stones or gravel
A plant
 An interest item like an ornament, a rock, or a crystal.  
(I used an old brass bell that was my Grandfathers.)
2 x thin sticks.
Piece of wire. 
My plant (a miniature anthurium) was too big,  
  so I broke it up. 
I actually got six plants from this one, and used three pieces for in the terrarium.
The flowering part of the plant was re-potted back into the original white container.
The other two pieces added to a hanging basket on the back porch.
Don't you love it when one plant turns into many?
Firstly put a layer of bark in the bottom of the bottle,
then add a layer of potting mix.
Use the stick to make a hole in the middle. Place your plant here.
Use the sticks to manipulate the plant into position and to push the soil around the roots.
Water lightly.
 Now add a layer of white stones or gravel.
Once again use the sticks to move the stones into place.
 Finally add your interest piece.
Use the wire with a hook bent on the end to place the interest item in the bottom.
 Finished and in place on the shelf...
The DIY Terrarium most certainly adds interest to the shelf display.
I love the way it compliments my old bottle collection.





DIY Anchor Pallet Artwork...

Pallet everything is so on trend at the moment!
 So here's my take on a pallet anchor picture...
It's a step by step photographic tutorial,
so gather your supplies and join in the fun!

You will need:
 Four pieces of pallet each cut to 45cm long,
plus two small offcuts to use as a backing.
The pallet pieces should be pre painted.  
I used white paint, but you can choose any colour you'd like.
Set the four pallet pieces tightly together, painted side face down,
 then place the backing wood as shown. 
 Nail the backing boards in place.  This stablilises the pallets and holds them in place.

 Print the free anchor template from here:

Use this as a guide to free hand draw the anchor onto the wood. Or enlarge the template slightly, cut out, and use as a template to draw the outline.

 Choose your paint colour (mines charcoal grey) and paint the anchor.
 I have seen this done with a coloured backing board and a white anchor, 
which is also really effective.
 Set aside to dry.
 When dry, add some highlights in silver or gold - whichever suits your colour choices.
When dry, seal with a coat of clear matt sealer.
 Attach a hanger.
I've used some rusty chain, but you could use chunky rope.
Hang and enjoy.
The DIY Anchor Pallet Artwork - a little rustic nautical fun!


#anchorcraft

Custard Lime Kisses...

I could call these biscuits, 
but kisses sound so much more deliciously romantic, don't you think?
And as we are having a everything lime time at Mia Bella Passions,
I adapted a very old family recipe to create these...
Custard Lime Kisses...
Oh yummo!!!!
We are right back on the sweet treat radar with these, 
as the kisses are sweet flavoured with custard,
and the tangy lime flavour is in the custard icing.
 You'll find the printable recipe HERE.

Custard Lime Kisses will disappear within hours of baking....
with a guarantee, there will be shouts for:
More kisses please!






How To Plant a Phalaenopsis Moth Orchid Bowl....

 Planted orchid bowls are pretty simple to create...
All you need is:
One large shallow bowl
Three orchid plants
A bag of premium orchid potting mix
Some orchid stakes and clips to hold the flower stems to the stakes.
 In the bowl, place about three cups of orchid mix.
Then arrange the orchid plants.
(I've used white Phalaenopsis Moth orchids)
Top with more orchid mix, stake and clip the flower stems,
 Until the roots establish themselves, 
you may need a few extra stakes to support the flower stems.
This bowl of orchids was planted in November last year,  it took about three months to stabilise before the extra stakes could be removed. 
 It also grew a new flower spike, having just finished flowering - 
an amazing 5 months later!!
The conditions in this room, are bright light with no direct drafts.  
No direct sunlight gets on the plant.
Though I did leave it in the bathroom where the light was much brighter (but still diffused) for a few hours when the plant was watered.

Moth Orchids are possibly my most favourite of the orchid species...
How can you not love these flowers?






DIY Rope and Brass Curtain Tie Backs...

I have been searching for quite some time 
for the perfect tie back for the Masculine French Bedroom to no avail.
A few years back I saw somewhere on the internet a DIY rope tieback.  
 I thought rope is quite masculine = perfect....
so this is my version...
For four curtain tie-backs, you will need:
(all materials for this project were found at Bunnings Warehouse in New Zealand, but elsewhere in the world your building supply store should stock everything)

4 x 20mm snap hooks
4 metres rope (thickness of your choice)
4 x brass olives (in the plumbing section) or brass rings
1 roll of 1 ply Sisal Lashing.
A glue gun & glue
Cup hooks 

(note chain is in the photo as I was going to use this, but didn't.  :))
Cut rope into 4  pieces.
I wanted a nice drape effect on the tie back,
so I cut my rope to 4 pieces measuring 90cm each.
If you want a tighter tieback shorten the length, 
making sure you allow for the turn-backs.
Put the snap hook through the rope... 
 Use the sisal lashing and the hot glue to fold back and bind the rope as shown.
 Do the same with the brass olive or ring.
 Trim the excess hairy bits of the rope to tidy it.
 Follow these instructions for the four tie-backs.
 Use the cup-hooks to attach at the back to the window frame or door jamb...
Make sure you measure the height from floor for each hook,
 so that the tiebacks hang at the same level.
Rope and brass curtain tiebacks are a whole lot more masculine...
The French masculine bedroom now has a hint of nautical...
French meets nautical?
Yes - I LOVE it!

Visit my 'Saatchi Art & Photography' store HERE

Original art store HERE



#curtaintiebacks #rope #diy #brass #nautical



Related Posts Plugin for WordPress, Blogger...